When I move, the first thing I do with urban outdoor furniture is stop treating it like “just outdoor stuff.” Balcony chairs, small patio tables, planters, folding screens, and rooftop lounge pieces can be awkward, heavy, and easy to scratch, so a little planning saves a lot of hassle. I start by measuring everything and checking the path it has to travel: the apartment door, hallway corners, elevator size, stairwell clearance, and the loading area. If a piece barely fits through the door, it will not magically fit into a moving van, so I measure twice and decide what can be disassembled.
Next, I remove cushions, glass tops, loose shelves, hanging planters, and anything that could shift. I put screws, bolts, and small parts in labeled zip-top bags and tape them to the furniture or keep them in one clear box. For glass tabletoppers, I wrap them in bubble wrap, add cardboard on both sides, and label them “FRAGILE — GLASS.” Metal frames get moving blankets or old towels, especially at corners and legs, and I use straps or stretch wrap to keep folding chairs closed. If something is really bulky, I take off the legs or remove the tabletop rather than forcing it through tight spaces.
For transport, I usually rent a small van or book a mover who handles bulky items. Urban furniture is often compact, so a cargo van can work well, but I still use straps to stop pieces from sliding. I load heavy items low and toward the front, put lighter items on top, and keep plants upright in boxes so soil doesn’t spill everywhere. If I’m using a building elevator, I reserve it ahead of time and check whether the building requires a moving certificate or a deposit. I also check parking rules for the moving van, because in a city the loading zone can be the hardest part of the whole move. In bad weather, I wrap furniture in plastic sheeting or moving bags and dry it off before storing it.
Finally, I decide what deserves to move. Rusted or wobbly pieces may cost more to move than to replace, and sometimes it’s smarter to sell, donate, or leave them for the next tenant. For anything I keep, I clean and dry it fully before loading so mold doesn’t start in storage. If the furniture will sit in a storage unit or garage for a while, I keep it off the floor on pallets or cardboard and cover it loosely so air can circulate. The whole process is less about being perfect and more about measuring, protecting, and using the right vehicle — that’s usually enough to get urban outdoor furniture to the new place in one piece.