For most urban outdoor furniture, you won’t need a full workshop—just a few carefully chosen tools and a little patience. Start by opening the hardware pack and reading the instructions, since many pieces include a hex key or Allen wrench that’s designed for the job.
Here’s what I’d keep within reach: the included Allen wrench or hex key set, an adjustable wrench, Phillips and flathead screwdrivers, a rubber mallet, a small socket set or ratchet, pliers, a tape measure, and a spirit level. A pair of work gloves is also handy for protecting your hands and the furniture finish.
If the instructions call for drilling or repetitive tightening, a cordless drill with hex bits can save time, but use it on a low clutch setting so you don’t strip the hardware. A soft cloth or furniture pads are useful for protecting surfaces during assembly.
Work on a clean, flat surface, don’t tighten every bolt until the piece is square, and use the level to check tabletops and seating. With these basic tools, most urban outdoor furniture assembly should be straightforward and frustration-free.