Yes—there is plenty of urban outdoor furniture designed to meet ADA requirements, but the key point is that compliance is rarely just about buying a single “ADA bench.” It depends on the product and how it is installed. Manufacturers now offer accessible benches, picnic tables, drinking fountains, receptacles, and site furnishings with dimensions and clearances that align with the ADA Standards for Accessible Design.
For benches, I’d look for models with back support and armrests, a seat height around 17–19 inches, and a clear floor space at the end of the bench so a person using a wheelchair can transfer or sit alongside others. For tables, specify accessible ends or individual accessible tables with the right knee and toe clearance, a usable top height, and enough clear space around them. Drinking fountains should include high-low units or an accessible lower unit, and trash or recycling receptacles need to be within reach and not block the accessible route.
The installation matters just as much as the furniture. Accessible routes should be firm, stable, and slip-resistant, with enough width and turning space. Furniture should not narrow paths or create hazards for people using wheelchairs, walkers, or strollers. In seating areas, it helps to provide companion seating and accessible spaces at regular intervals rather than one isolated compliant bench in a distant corner.
So the practical answer is yes: ADA-compliant outdoor furniture exists for public spaces. But specify it carefully, review the site layout, and confirm clearances and reach ranges after installation—not just on the catalog page.